Finesoft
Runs the program in the Finecut system while controlling and monitoring the production process.
Controlled productionFinepart's proprietary machine-control platform
Finesoft.
A single operator environment for preparing jobs, controlling the machine, monitoring the cutting process and supporting service and maintenance throughout the Finecut lifecycle.
OwnershipDeveloped by Finepart
InterfaceFinecut touchscreen HMI
ProductionReal-time control
LifecycleDiagnostics & TPM
Complementary software roles
Prepare in IGEMS.
Produce in Finesoft.
The two platforms form one connected workflow, with a clear handover from waterjet programming to controlled machine execution.
Developed specifically for Finecut
One interface.
Every machine layer.
Finesoft is developed and maintained by Finepart and configured to the exact specification of each Finecut system. The application-specific touchscreen workflow means operators do not need to work directly in the underlying CNC environment.
- 01Operator interface
Machine functions, process information and production controls are presented in one purpose-built touchscreen environment.
- 02FANUC CNC & motion
Finesoft connects the operator workflow to the Finecut CNC, axes and precision motion system.
- 03Cutting equipment
Cutting heads, water pressure, abrasive flow, radius compensation and installed process equipment can be controlled from the platform.
- 04Peripheral units
The individual installation can incorporate and control the equipment supplied with the selected Finecut configuration.
Job preparation & production control
From program
to repeatable job.
Settings, production information and operator notes are stored with each job, reducing manual preparation when proven work is run again.
Bring the program in.
Import from a network location or USB device, then preview component geometry and CNC program before production.
Define the setup.
Create and queue jobs, set program zero points and work offsets, adjust coordinates and configure multiple-part work.
Set the cutting conditions.
Adjust water pressure, abrasive flow and radius compensation, and control cutting heads, feeders and installed equipment.
Keep production visible.
Follow machine position, feed rate, elapsed time and progress. Archive completed and configured jobs for repeatable production.
Process monitoring & operator support
Stay in control—
before and during the cut.
Machine status, axis positions, pressure, abrasive flow, feed rate, tool compensation and current program position remain visible from the main interface.
Program Check
Verifies a program before cutting without moving the machine axes.
Dry Run
Runs programmed movements without activating the cutting process.
Retrace
Moves backwards along a contour before the cutting jet is restarted.
Program Restart
Supports a controlled restart from a selected position after an interruption.
Tool Retract & Recover
Moves the cutting head away for inspection or maintenance and returns it to the interruption point.
Working Height Compensation
Allows controlled adjustment of cutting height during operation.
Single Block Operation
Executes the CNC program one block at a time for verification or specialised work.
User access & process control
Protect validated settings.
Configurable user levels restrict selected functions according to operator authorisation. Access can be controlled for water pressure, abrasive flow, radius compensation, work offsets, job archives, CNC memory and abrasive calibration—supporting consistent operation across users and shifts.
Maintenance, diagnostics & traceability
Information that supports uptime.
The Information area brings together alarms, messages, help, service information, operating-hour counters and machine logs. Finepart technicians can use this information when technical assistance is required.
The Total Productive Maintenance function can present scheduled daily, weekly and monthly checks with recurrence and recommended actions.
DailyOperator checksWeeklyRecurring careMonthlyPlanned maintenance
A continuously developing Finecut platform
Configured today.
Adaptable tomorrow.
Every Finesoft installation is matched to its Finecut system, options and applications. When the machine gains new hardware or functionality, the platform can be updated and adapted with it.
By developing the platform in-house, Finepart controls the interaction between operator software, CNC, motion system and process equipment—providing an environment designed specifically for precision micro-abrasive waterjet cutting.
Discuss your Finecut workflow ↗One connected production environment
Program in IGEMS.
Run in Finesoft.
Finepart configures the software, CNC, motion system and process equipment as one Finecut solution matched to your application and machine specification.